Symphony 2 with Ultrafilter

Clear, filtered water from every faucet, with ultrafiltration

Peak flow rate

15 gpm

NSF certified mark

Certified to NSF/ANSI 42 and 53

Symphony 2 with Ultrafilter filtration system

What the Symphony 2 with Ultrafilter whole-house system addresses

Chlorine taste and odor

Pesticides and herbicides (based on independent research data; not part of NSF certification)

Active Armour™ conditioning, designed to reduce scale and corrosion in internal testing

Colloidal clay and turbidity

Organics like VOCs (based on independent research data; not part of NSF certification)

Unpleasant tastes and odors

Sediment and particulates down to 10 micron

System certified to NSF/ANSI 42 and 53 for chlorine taste and odor and cyst reduction; cyst reduction is certified for the complete system under NSF/ANSI 53

How it works

Stage 1: prefilter and Active Armour™ conditioning

This first stage of filtration utilizes a high capacity 10 micron pre-filter to clarify your water and protect your ultrafilter from large particulates for 150,000 gallons. Simultaneously, this filtration stage also harnesses the power of Active Armour™ to condition your water. Active Armour™ is designed to reduce corrosion and hard water scale on plumbing, appliances, and fixtures in internal testing.

Stage 2: Symphony Ultrafilter (FLT-CSS-UF)

The Symphony Ultrafilter (FLT-CSS-UF) is a self-cleaning ultrafiltration module rated to approx. 0.02 micron (manufacturer data). It is designed to reduce turbidity, colloidal clay and high molecular weight organic contaminants. The complete system is certified to NSF/ANSI 53 for cyst reduction; NSF/ANSI P231 listing is pending. Rated for up to 1,000,000 gallons. One Ultrafilter handles up to 15 gpm; the Symphony 1 and 2 series take one Ultrafilter.

Stage 3: extreme high-capacity carbon blocks

Two Extreme High Capacity Carbon Blocks work to further polish your water to address Chlorine, Organics, Herbicides, and Pesticides and improve tastes and odors. Each Cartridge is rated to filter up to 265,000 gallons for a total filtering capacity of 530,000 gallons.

Before and after: a Utah well water example

Initially, the water coming out of this Utah well was highly contaminated and black, but after the Symphony 2 with Ultrafilter System was installed, the water is now crystal clear!

Water samples from the Utah well case study

Read the Symphony 2 with Ultrafilter case study (PDF)

Product specifications

Specification

Value

Dimensions

30” x 7” x 56”

Operating Pressure

30 to 80 psi

Water Temperature

40 to 80°F

Electrical Requirement

110 VAC, 0.5 A

Drain Flow Rate

3 gpm

Drain Connection Size

3/4” FNPT

Connection Size

1” MNPT

Peak Flow Rate

15 gpm

Stage 1 - Prefilter & Active Armour™

1 x FLT-CSS-4B16P

Stage 2 - Ultrafilter

1 x FLT-CSS-UF

Stage 3 - High-Capacity Carbon Block

2 x FLT-CSS-4B25XHC

Symphony Ultrafilter installation
Symphony Ultrafilter installation

Symphony Ultrafilter installation

Ready to improve your water quality?

Symphony Water

Whole-house filters, working hard for you.

NSF certified mark

© Copyright 2026 | Symphony Water | All Rights Reserved.

© Copyright 2026 | Symphony Water | All Rights Reserved.